I lost a piece that prevents me from completing the assembly of my robot. it will be possible to provide me the dimensions of this piece to try to print it on a 3D printer
Do this first: https://www.small-hammer.com/docs/snam500/ Then: 1. Download the make tea code here: http://cdn.sinoning.com/code/Manipulator_make_tea_v2.zip 2. Unzip and install with 7 Zip. 3. Connect pin 4 to ground pin using a momentary switch to initiate process. 4.. Follow robot movements in this video (below) to verify properly connected servos and sync with proper movements. Servos: (brown colored conductor pointing toward potentiometers). Pin 1 - Claw Pin 2 - Long Arm Pin 3 - Short Arm Pin 4 - Base https://www.sinoning.cc/single-post/2017/05/25/SNARM-robot-arm-auto-make-tea